Screw-on version from front or rear side
Rocker non-illuminated
white

Snap-in mounting from front side
Rocker illuminated
orange

Series

EF11

IEC Appliance Inlet C20 with Circuit Breaker TA45

21 Variants

Connectors (Inlets/Outlets)

C20

70° C

Approvals and Compliances

Description EF11

Description

Panel mount: Screw-on version from front or rear side, snap-in version front side
2 Functions: Appliance Inlet Protection class I, circuit breaker type TA45 2-pole
Quick connect terminals 6.3 x 0.8 mm

Characteristics

All single elements are already wired
Unwired versions available on request
Circuit Breaker non-illuminated or illuminated
Suitable for use in equipment according to IEC/UL 62368-1

Other versions on request

Unwired versions
Variant with notch for V-Lock mating Cordsets

Detailed request for product

Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.

Details EF11

Technical Data

Approvals and Compliances

Dimension

Electrical Data

Ratings IEC

The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

16 A / 250 VAC; 50 Hz

Ratings UL/CSA

Ratings UL

20 A / 250 VAC; 60 Hz

Dielectric Strength

Information about the maximum permissible voltage, to avoid a voltage breakdown due to insulation damage.
Dielectric Strength

> 1.5 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)

Allowable Operation Temperature

-10 °C to 55 °C

IP-Protection

The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

front side IP40 acc. to IEC 60529

Protection against electric shock

IP-Protection

Suitable for appliances with protection class I acc. to IEC 61140

Terminal

Terminals

Terminals according IEC Standard.
Detailed information about terminals can be looked up in the date sheet or in the general product information.
Terminal

Quick connect terminals 6.3 x 0.8 mm

Panel Thickness S

See details in drawing
Snapper

Screw: max 8 mm
Mounting screw torque max 0.5 Nm
Snap-in: 1.5/2/2.5 mm

Material: Housing

Thermoplastic, black, UL 94V-0

Appliance inlet/-outlet

Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42
Details on connectors and their names can be found in the general product information
Appliance Couplers Mating Connectors Term explanation Special Connector Designs

C20 acc. to IEC 60320-1,
UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 16 A, Protection Class I

Circuit Breakers

Circuit Breaker

Circuit Breakers type and amount of switched poles
Details of Circuit Breakers can be found in the catalog or in the general product information
Circuit Breaker

Acc. IEC/EN 60934, UL 1077, CSA 22.2 no. 235
2-pole rocker switch, illuminated or non-illuminated. Optional with undervoltage- or remote trip release
Short circuit capacity Icn:
at In < 3A/240VAC : 10 x In
at In ≥ 3A/240VAC : 300A

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: EF11

Approval Logo	Certificates	Certification Body	Description
	VDE Approvals	VDE	Certificate Number: 40001029
	UL Approvals	UL	UR File Number: E96454

Product standards

Product standards that are referenced

Design	Standard	Description
Designed according to	IEC 60320-1	Appliance couplers for household and similar general purposes
Designed according to	UL 60320-1	Standard for Attachment Plugs and Receptacles
Designed according to	CSA C22.2 no. 60320-1	General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Application standards

Application standards where the product can be used

Organization	Design	Standard	Description
	Suitable for applications acc.	IEC/UL 62368-1	Audio/video, information and communication technology equipment - Part 1: Safety requirements

Compliances

The product complies with following Guide Lines

Details	Initiator	Description
CE declaration of conformity	SCHURTER AG	The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity	SCHURTER AG	The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008.
RoHS	SCHURTER AG	Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS	SCHURTER AG	The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
REACH	SCHURTER AG	On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.
	SCHURTER AG	V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.

Order number key EF11

Short Table of Variants EF11 Open complete table EF11

Rated Current CBE [A]	Rocker colour	Illumination	Order Number	...

15	orange transparent	illuminated	3-125-296	...
20	orange transparent	illuminated	EF11.2561.0010.01	...
20	orange transparent	illuminated	EF11.2561.0012.01	...
20	orange transparent	illuminated	EF11.3197.0010.01	...
20	black	non-illuminated	3-109-889	...
15	black	non-illuminated	EF11.1089.0010.01	...
15	black	non-illuminated	EF11.1089.0013.01	...
15	black	non-illuminated	EF11.1682.0010.01	...
20	black	non-illuminated	EF11.1894.0010.01	...
10	black	non-illuminated	EF11.2078.0010.01	...
20	black	non-illuminated	EF11.2196.0010.01	...
20	black	non-illuminated	EF11.2196.0013.01	...
10	white	non-illuminated	EF11.0022.0010.01	...
20	white	non-illuminated	EF11.0035.0010.01	...
20	white	non-illuminated	EF11.0035.0012.01	...
10	white	non-illuminated	EF11.0470.0010.01	...
20	white	non-illuminated	EF11.0572.0012.01	...
16	white	non-illuminated	EF11.0699.0010.01	...
16	white	non-illuminated	EF11.0699.1013.01	...
15	white	non-illuminated	EF11.0885.0010.01	...
15	white	non-illuminated	EF11.2405.0010.01	...

Packaging unit

16 Pcs

Table of Variants EF11

Rated Current CBE [A]	Rocker colour	Illumination	Diagram	Mounting	V-Lock	Internally wired	Config. Code	Order Number	PU Packaging unit The packaging unit is the amount of parts in a standard package. Please contact SCHURTER for further assistance: Contact Form

15	orange transparent	illuminated	2-pole	Screw	•	•	EF11-A326L150C0-000-331-009	3-125-296	16
20	orange transparent	illuminated	2-pole	Screw		•	EF11-A326K200C0-000-331-000	EF11.2561.0010.01	16
20	orange transparent	illuminated	2-pole	Snap-in 1.5mm		•	EF11-A326K200C0-000-331-200	EF11.2561.0012.01	16
20	orange transparent	illuminated	1-pole	Screw		•	EF11-A126K200C0-000-331-000	EF11.3197.0010.01	16
20	black	non-illuminated	2-pole	Screw	•	•	EF11-ABDBF200C0-000-331-009	3-109-889	16
15	black	non-illuminated	2-pole	Screw		•	EF11-ABDBL150C0-000-331-000	EF11.1089.0010.01	16
15	black	non-illuminated	2-pole	Snap-in 2.0mm		•	EF11-ABDBL150C0-000-331-300	EF11.1089.0013.01	16
15	black	non-illuminated	2-pole	Screw		•	EF11-ABDBP150C0-000-331-000	EF11.1682.0010.01	16
20	black	non-illuminated	2-pole	Screw		•	EF11-ABDBP200C0-000-331-000	EF11.1894.0010.01	16
10	black	non-illuminated	2-pole	Screw		•	EF11-ABDBL100C0-000-331-000	EF11.2078.0010.01	16
20	black	non-illuminated	2-pole	Screw		•	EF11-ABDBL200C0-000-331-000	EF11.2196.0010.01	16
20	black	non-illuminated	2-pole	Snap-in 2.0mm		•	EF11-ABDBL200C0-000-331-300	EF11.2196.0013.01	16
10	white	non-illuminated	1-pole	Screw		•	EF11-ABTWF100C0-000-331-000	EF11.0022.0010.01	16
20	white	non-illuminated	1-pole	Screw		•	EF11-ABTWF200C0-000-331-000	EF11.0035.0010.01	16
20	white	non-illuminated	1-pole	Snap-in 1.5mm		•	EF11-ABTWF200C0-000-331-200	EF11.0035.0012.01	16
10	white	non-illuminated	2-pole	Screw		•	EF11-ABDWF100C0-000-331-000	EF11.0470.0010.01	16
20	white	non-illuminated	2-pole	Snap-in 1.5mm		•	EF11-ABDWF200C0-000-331-200	EF11.0572.0012.01	16
16	white	non-illuminated	2-pole	Screw		•	EF11-ABDWF160C0-000-331-000	EF11.0699.0010.01	16
16	white	non-illuminated	2-pole	Snap-in 2.0mm		•	EF11-ABDWF160C0-000-331-309	EF11.0699.1013.01	16
15	white	non-illuminated	2-pole	Screw		•	EF11-ABDWF150C0-000-331-000	EF11.0885.0010.01	16
15	white	non-illuminated	1-pole	Screw		•	EF11-ABTWF150U2-000-331-000	EF11.2405.0010.01	16

Packaging unit

16 Pcs

Mating Outlets/Connectors (8)

[Swipe to the left and right for more options]

Mating Outlets/Connectors shuttered (2)

[Swipe to the left and right for more options]

Accessories EF11

02.04.2025

Ambient Temperature [°C]	Correction factor
-10	0.89
-5	0.91
0	0.92
+23	1.00
+30	1.03
+40	1.08
+55	1.16

Transformation_Date:	2025-04-02 22:41:50
Export_Path:	/Datasheets_PrGrp_Workflow/DS_PrGrp_WF_GST/DS_PrGrp_WF_GST_PG05_Export/2025_04_02/14_29_59_470_553664/
Export_Lang:	en
SGE_Name:	Connectors
PG_Name:	Power Entry Modules without Line Filter
Typ_Name:	EF11
Typ_AliasNames:	:ef11:
Typ_ID:	306
Typ_Hierarchie:	020050170000001301
Typ_EPIM_Order:	30
Typ_Titel:	IEC Appliance Inlet C20 with Circuit Breaker TA45
PublPrgr_Name:	Power Entry Module without Filter
PublPrgr_Shortcut:	PG05
Variant table:	Variantentabelle_EF11 (247915)

EF11

Description EF11

Description

Characteristics

Other versions on request

Details EF11

Approvals

Product standards

Application standards

Compliances

Dimensions [mm]

Diagrams

Time-Current-Curves

Effect of ambient temperature

Order number key EF11

Short Table of Variants EF11 Open complete table EF11

References / Document Downloads

References EF11

Alternative: version with line filter (1)

Mating Components EF11

Mating Outlets/Connectors (8)

Mating Outlets/Connectors shuttered (2)

Accessories EF11

Accessories (1)

	Screw-on mounting

	** --- Version TA45 with undervoltage relaese

	Snap-in mounting

	**--- Version TA45 with undervoltage release



	1) Line 2) Load

	Tripping Characteristics In < 3 A